Students re-represent a state given in Dirac notation in matrix notation

This activity acts as a reintroduction to doing quantum calculations while also introducing the matrix representation on the ring, allowing students to discover how to index and form a column vector representing the given quantum state. In addition, this activity introduces degenerate measurements on the quantum ring and examines the state after measuring both degenerate and non-degenerate eigenvalues for the state.

• Students evaluate two given partial derivatives from a system of equations.
• Students learn/review generalized Leibniz notation.
• Students may find it helpful to use a chain rule diagram.

None

Calculating Total Charge

Each group will be given one of the charge distributions given below: (\(\alpha\) and \(k\) are constants with dimensions appropriate for the specific example.)

• Spherical Symmetery

  1. A positively charged (dielectric) spherical shell of inner radius \(a\) and outer radius \(b\) with a spherically symmetric internal charge density \(\rho (\vec{r}) = \alpha\, r^{3}\)

  2. A positively charged (dielectric) spherical shell of inner radius \(a\) and outer radius \(b\) with a spherically symmetric internal charge density \(\rho (\vec{r}) =\alpha\, e^{(kr)^{3}}\)

  3. A positively charged (dielectric) spherical shell of inner radius \(a\) and outer radius \(b\) with a spherically symmetric internal charge density \(\rho (\vec{r}) = \alpha\, \frac{1}{r^{2}}\, e^{(kr)}\)

• Cylindrical Symmetry

  1. A positively charged (dielectric) cylindrical shell of inner radius \(a\) and outer radius \(b\) with a cylindrically symmetric internal charge density \(\rho (\vec{r}) = \alpha\, s^{3}\)

  2. A positively charged (dielectric) cylindrical shell of inner radius \(a\) and outer radius \(b\) with a cylindrically symmetric internal charge density \(\rho (\vec{r}) =\alpha\, e^{(ks)^{2}}\)

  3. A positively charged (dielectric) cylindrical shell of inner radius \(a\) and outer radius \(b\) with a cylindrically symmetric internal charge density \(\rho (\vec{r}) = \alpha\, \frac{1}{s}\, e^{(ks)}\)

For your group's case, answer the following questions:

1. Find the total charge. (If the total charge is infinite, decide what you should calculate instead to provide a meaningful answer.)
2. Find the dimensions of the constants \(\alpha\) and \(k\).

Instructor's Guide

Introduction

We usually start with a mini-lecture reminder that total charge is calculated by integrating over the charge density by chopping up the charge density, multiplying by the appropriate geometric differential (length, area, or volume element), and adding up the contribution from each of the pieces. Chop, Multiply, Add is a mantra that we want students to use whenever they are doing integration in a physical context.

The students should already know formulas for the volume elements in cylindrical and spherical coordinates. We recommend Scalar Surface and Volume Elements as a prerequisite.

We start the activity with the formulas \(Q=\int\rho(\vec{r}')d\tau'\), \(Q=\int\sigma(\vec{r}')dA'\), and \(Q=\int\lambda(\vec{r}')ds'\) written on the board. We emphasize that choosing the appropriate formula by looking at the geometry of the problem they are doing, is part of the task.

Each student group is assigned a particular charge density that varies in space and asked to calculate the total charge. This activity is an example of https://paradigms.oregonstate.edu/whitepaper/compare-and-contrast-activity.

Student Conversations

This activity helps students practice the mechanics of making total charge calculations.

• Order of Integration When doing multiple integrals, students rarely think about the geometric interpretation of the order of integration. If they do the \(r\) integral first, then they are integrating along a radial line. What about \(\theta\) and \(\phi\). If this topic does not come up in the small groups, it makes a rich discussion in the wrap-up.
• Limits of Integration some students need some practice determining the limits of the integrals. This issue becomes especially important for the groups working with a cylinder - the handout does not give the students a height of the cylinder. There are two acceptable resolutions to this situation. Students can “name the thing they don't know” and leave the height as a parameter of the problem. Students can also give the answer as the total charge per unit length. We usually talk the groups through both of these options.
• Dimensions Students have some trouble determining the dimensions of constants. Making students talk through their reasoning is an excellent exercise. In particular, they should know that the argument of the exponential function (indeed, the argument of any special fuction other than the logarithm) must be dimensionless.
• Integration Some students need a refresher in integrating exponentials and making \(u\)-substitutions.

Wrap-up

You might ask two groups to present their solutions, one spherical and one cylindrical so that everyone can see an example of both. Examples (b) and (f) are nice illustrative examples.

None

In this small group activity, students draw components of a vector in Cartesian and polar bases. Students then write the components of the vector in these bases as both dot products with unit vectors and as bra/kets with basis bras.

Students each recall a representation of vectors that they have seen before and record it on an individual whiteboard. The instructor uses these responses to generate a whole class discussion that compares and contrasts the features of the representations. If appropriate for the class, the instructor introduces bra/ket notation as a new, but valuable representation.

The following are 3 different representations for the \(\textbf{same}\) state on a quantum ring for \(r_0=1\) \begin{equation} \left|{\Phi_a}\right\rangle = i\sqrt{\frac{ 2}{12}}\left|{3}\right\rangle - \sqrt{\frac{ 1}{12}}\left|{1}\right\rangle +\sqrt{\frac{ 3}{12}}e^{i\frac{\pi}{4}}\left|{0}\right\rangle -i\sqrt{\frac{ 2}{ 12}}\left|{-1}\right\rangle +\sqrt{\frac{ 4}{12}}\left|{-3}\right\rangle \end{equation} \begin{equation} \left| \Phi_b\right\rangle \doteq \left( \begin{matrix} \vdots \\ i\sqrt{\frac{ 2}{12}}\\ 0 \\ -\sqrt{\frac{ 1}{12}} \\ \sqrt{\frac{ 3}{12}}e^{i\frac{\pi}{4}} \\ -i\sqrt{\frac{ 2}{12}}\\ 0 \\ \sqrt{\frac{4}{12} }\\ \vdots \end{matrix}\right) \begin{matrix} \leftarrow m=0 \end{matrix} \end{equation} \begin{equation} \Phi_c(\phi) \doteq \sqrt{\frac{1}{24 \pi}} \left( i\sqrt{2}e^{i 3 \phi} -e^{i\phi} +\sqrt{3}e^{i\frac{\pi}{4}} -i \sqrt{2} e^{-i\phi} + \sqrt{4}e^{-i 3 \phi} \right) \end{equation}

1. With each representation of the state given above, explicitly calculate the probability that \(L_z=-1\hbar\). Then, calculate all other non-zero probabilities for values of \(L_z\) with a method/representation of your choice.
2. Explain how you could be sure you calculated all of the non-zero probabilities.
3. If you measured the \(z\)-component of angular momentum to be \(3\hbar\), what would the state of the particle be immediately after the measurement is made?
4. With each representation of the state given above, explicitly calculate the probability that \(E=\frac{9}{2}\frac{\hbar^2}{I}\). Then, calculate all other non-zero probabilities for values of \(E\) with a method of your choice.

5. If you measured the energy of the state to be \(\frac{9}{2}\frac{\hbar^2}{I}\), what would the state of the particle be immediately after the measurement is made?

Students draw the 3D graphs of equations using three variables. They make choices for drawing a stack of curves in parallel planes and a curve in a perpendicular plane (e.g. substituting in values for \(x\), \(y\), or \(z\). )

Students calculate probabilities for a particle on a ring using three different notations: Dirac bra-ket, matrix, and wave function. After calculating the angular momentum and energy measurement probabilities, students compare their calculation methods for notation.

This activity lets students explore translating a wavefunction that isn't obviously made up of eigenstates at first glance into ket and matrix form. Then students explore wave functions, probabilities in a region, expectation values, and what wavefunctions can tell you about measurements of \(L_z\).

Representations of the Infinite Square Well

Consider three particles of mass \(m\) which are each in an infinite square well potential at \(0<x<L\).

The energy eigenstates of the infinite square well are:

\[ \left\langle {x}\middle|{E_n}\right\rangle =\phi_n(x) = \sqrt{\frac{2}{L}}\sin{\left(\frac{n \pi x}{L}\right)}\]

with energy eigenvalues \(E_n = \frac{n^2 \pi^2 \hbar^2}{2mL^2}\)

The particles are initially in the states, respectively: \begin{eqnarray*} |\psi_a(0)\rangle &=& A \Big[\left|{E_1}\right\rangle + 2i \left|{E_4}\right\rangle - 3\left|{E_{10}}\right\rangle \Big]\\[6pt] \psi_b(x,0) &=& B \left[\sqrt{\frac{2}{L}}\sin{\left(\frac{\pi x}{L}\right)} + i \sqrt{\frac{8}{L}}\sin{\left(\frac{4\pi x}{L}\right)} - \sqrt{\frac{18}{L}}\sin{\left(\frac{10\pi x}{L}\right)} \right]\\[6pt] \psi_c(x,0) &=& C x(x-L) \end{eqnarray*}

For each particle:

1. Determine the value of the normalization constant.
2. At \(t=0\), what is the probability of measuring the energy of the particle to be \(\frac{8\pi^2\hbar^2}{mL^2}\)?
3. Find the state of the particle at a later time \(t\).
4. What is the probability of measuring the energy of the particle to be the same value \(\frac{8\pi^2\hbar^2}{mL^2}\) at a later time \(t\)?
5. What is the probability of finding the particle to be in the left half of the well?

Student Conversations

1. Help students recognize that particle \(a\) and particle \(b\) are in the same state.
2. For normalization, emphasize that you must calculate the square of the norm of the state BEFORE you integrate.
3. The energy value given is simplified - students need to recognize that this energy corresponds to \(n=4\).
4. Time evolving particle \(c\) is brutal for the students. Reassure students that they have to leave it as a sum. Setting up the integral is the point here. For time expediancy, encourage students to leave the integral to be evaluated later.
5. For Hamiltonian's that don't don't depend on time, the probabilities of measuring energies are time independent.
6. Emphasize to students that you can't calculate the probability of finding a particle in a region in Dirac notation.

Students calculate probabilities for energy, angular momentum, and position as a function of time for an initial state that is a linear combination of energy/angular momentum eigenstates for a particle confined to a ring written in bra-ket notation. This activity helps students build an understanding of when they can expect a quantity to depend on time and to give them more practice moving between representations.

This small group activity using surfaces combines practice with the multivariable chain rule while emphasizing numerical representations of derivatives. Students work in small groups to measure partial derivatives in both rectangular and polar coordinates, then verify their results using the chain rule. The whole class wrap-up discussion emphasizes the relationship between a directional derivative in the \(r\)-direction and derivatives in \(x\)- and \(y\)-directions using the chain rule.

This small whiteboard question (SWBQ) serves as a quick review of the dot product. It is also an opportunity to help students see the advantages of knowing many different representations of and facts about a physical concept.

Students, working in pairs, use the Arms representations to represent states of spin 1/2 system. Through a short series of instructor-led prompts, students explore the difference between overall phase (which does NOT distinguish quantum states) and relative phase (which does distinguish quantum states).

Students move their left arm in a circle to trace out the complex plane (Argand diagram). They then explore the rectangular and exponential representations of complex numbers by using their left arm to show given complex numbers on the complex plane. Finally they enact multiplication of complex numbers in exponential form and complex conjugation.

Students see probability density for eigenstates and linear combinations of eigenstates for a particle on a ring. The three visual representations: standard position vs probability density plot, a ring with colormapping, and cylindrical plot with height and colormapping, are also animated to visualize time-evolution.

Students are prompted to consider the scalar superposition of the electric potential due to multiple point charges. First a single point charge is discussed, then four positive charges, then an electric quadrupole. Students draw the equipotential curves in the plane of the charges, while also considering the 3D nature of equipotentials.

This small group activity using surfaces introduces a geometric interpretation of partial derivatives in terms of measured ratios of small changes. Students work in small groups to identify locations on their surface with particular properties. The whole class wrap-up discussion emphasizes the equivalence of multiple representations of partial derivatives.

This is the first activity relating the surfaces to the corresponding contour diagrams, thus emphasizing the use of multiple representations.

Students work in small groups to interpret level curves representing different concentrations of lead.